Precision plaster or hard plaster

Recommended mixing ratio:

2.5 parts powder to 1 part water.

Demolding: 30 minutes

Preparation of the plaster:

Pour water into a large container. Disperse the plaster over the entire surface of the water. Let the plaster absorb the water for 1 to 2 minutes without mixing. Then mix gently and allow air bubbles to rise. Never add water after mixing. Slowly pour the plaster along the wall of the mold. For complex shapes, empty and start a second time.

Tips :

• Cold water slows the setting of the plaster, hot water or beating speeds it up.
• To speed up the drying process, place the object in a microwave oven for a few moments.
• Milk mixed with water will polish the object giving it a marbled appearance.
• Add an acrylic color to the water to color the plaster in the mass. Spreading it in the preparation will give marbled effects.

Light plaster

Recommended mixing:

1.5 parts powder to 1 part water.

Demolding recommended after 30 minutes.                                  

Preparation of the plaster:

Pour the water into a large container. Disperse the plaster over the entire surface of the water. Let the plaster absorb the water for 1 to 2 minutes without mixing. Then mix gently and allow air bubbles to rise. Never add water after mixing. Slowly pour the plaster along the wall of the mold. For complex shapes, empty and start a second time.

Tips :

• Cold water slows the setting of the plaster, hot water or beating speeds it up.
• To speed up the drying process, place the object in a microwave oven for a few moments.
• Milk mixed with water will polish the object giving it a marbled appearance.
• Add an acrylic color to the water to color the plaster in the mass. Spreading it in the preparation will give marbled effects.

Plaster Resin

Gauging recommended:

3 parts powder to 1 part water.

Start of setting: 8 minutes

End of setting: 15 minutes

Demolding: recommended after 30 minutes

Preparation of the plaster:

Pour water into a large container. Disperse the plaster over the entire surface of the water. Let the plaster absorb the water for 1 to 2 minutes without mixing. Then mix gently and allow air bubbles to rise. Never add water after mixing. Slowly pour the plaster along the wall of the mold. For complex shapes, empty and start a second time.

Tips :

• Cold water slows the setting of the plaster, hot water or beating speeds it up.
• To speed up the drying process, place the object in a microwave oven for a few moments.
• Milk mixed with water will polish the object giving it a marbled appearance.
• Add an acrylic color to the water to color the plaster in the mass. Spreading it in the preparation will give marbled effects.